Board Doesn’t Connect: If your board doesn't connect i.e fails to be recognized by the software. Proceed to the following steps below. Ensure USB is fully pl...

Issue with Remote Controller Transmitter Setup: If the Remote Control (RC) Transmitter fails to connect and displays the following message: “Transmitter Cali...

Step 1: If the charger doesn’t turn on, proceed to the following steps below: First plug the outlet cable into the charger brick Then plug in the other end o...

If a single drone motor fails to spin, here a few things to look out for. Step 1: Assuming this issue is occurring during the software calibration process, m...