top of page

Help - My Controller doesn't connect to the Drone

Updated: Dec 2, 2020

Issue connecting Controller to Drone

Drone Kit:

After following all the drone kit instructions and both your controller and drone turn on but do not connect to each other, this issue comes down to the cable wiring.

The wiring from the Flight Control Board (top-most board) splits into six individual cables:

  • Make sure all six cables are all plugged into the receiver, in order from 1-6 in the following color order seen in the image below

  • The exposed pins of the colored cables are facing towards the top of the receiver

  • Channel 1 should be a three cable combo because it also supplies power to the receiver

If issues still persist, please contact us and we will replace your transmitter and receiver setup given your product is under warranty.


Did we resolve your issue?

If you have a unique issue related to your controller, please send us a Direct Message using the button on the bottom right of your screen or email us at Leave your name, email and phone number and we will get back to you as soon as possible.

623 views0 comments

Recent Posts

See All

Help - My Board Doesn't Connect

Board Doesn’t Connect: If your board doesn't connect i.e fails to be recognized by the software. Proceed to the following steps below. Ensure USB is fully plugged into the board and the computer Try s

Help - Drone Battery / Charger Issue

Step 1: If the charger doesn’t turn on, proceed to the following steps below: First plug the outlet cable into the charger brick Then plug in the other end of the cable into an outlet The charger shou

Help - Issue with Remote Controller Transmitter Setup

Issue with Remote Controller Transmitter Setup: If the Remote Control (RC) Transmitter fails to connect and displays the following message: “Transmitter Calibration Setup Wizard is not recognizing” Ma


Os comentários foram desativados.
bottom of page